Ghetto Tech – Heads Lifestyle Inc.

Home › Ghetto Tech

  • Twitter
  • Facebook
  • Instagram
  • Pinterest
  • Youtube
  • Spotify
  • LinkedIn

May 04, 2020

heads_logo_w_line_for_blog_medium-6721001 Desperate times call for desperate measures A Generation joint (otherwise known as a Mach joint) is about as ghetto as you can get, but it works, and it’ll get you high. Follow these simple steps and you’re on your way from ghetto to good ‘n’ stoned!

Read more

April 23, 2020

heads_logo_w_line_for_blog_medium-6721001 Microdose these juicy little bears Nothing to fear here: Our homemade THC Gummy Bears pack but a small dose so you can microdose with ease. Gummies are surprising simple to make. Collect everything you need and get cooking with your first batch of edibles. Microdosing is a great way to manage anxiety in these high-stress times. Each gummy bear contains approximately 5mg of THC, which is a good starting point for the uninitiated. Remember to start low and go slow. It can take up to an hour to feel the full effects of the THC. Make a “virgin” batch for nibbling when the munchies set in.

Read more

April 07, 2020

heads_logo_w_line_for_blog_medium-6721001 Culinary Cannabis Basic Building Block For many newcomers, edibles are an gentler introduction to the world of cannabis. Cooking with cannabis is an excellent alternative to smoking especially for mmj patients and microdosers. Cannabis butter is the culinary basic building block for a wide range of recipes from sweet to savoury. 

Read more

March 06, 2019

heads_logo_w_line_for_blog_grande-7732729

Let the bag squeezing commence!

We were feeling particularly innovative of late, so decided to go to our local medical supply store to see what we could find. If you’ve never thought of heading to one to stock up on ghetto tech stuff, then you don’t know what you’re missing.

A lot of medical supply shops do not require a prescription for most items, so any old schmuck can just walk in and buy what they want. We found this oxygen mask in aisle 3, sandwiched between surgical masks and catheters. It was love at first sight.

The possibilities with a device like this are endless. Hardcore DIY-ers will find dozens of uses for this thing. Break it down into pieces and get creative!

gt_thc_mask_0_layers_1024x1024-7510882

What you’ll need:

– Oxygen mask

– Cannabis

– Rolling papers

– Lighter

– Duct tape (Duh!)

How to:

gt_thc_mask_1_layers_1024x1024-8347828

Step 1

Tape up 3 of the 4 holes of the accordion device. You’ll need the last one as a carb. (If all the holes are open, it won’t suck up the smoke. If they’re all blocked, the bag won’t inflate.)

Step 2

Roll a joint that will fit in the end of the long skinny tube—the one that would normally deliver oxygen. Light the joint and put it in the tube. (Note: Compressed oxygen is flammable. Make sure none of that is lying around before you light up that doob.)

Step 3

Sit down and place the tube between your knees so nothing catches on fire.

Step 4

Put the mask up to your face. Keep it in place by holding onto the bag.

Step 5

Your other hand will control the carb. Place your finger there in anticipation of what’s to come.

Step 6

Squeeze the bag while you pull your finger on and off the carb hole. Once the bag squeezing commences, you’ll be inhaling nothing but sweet THC smoke!

 ——-

You may also like:

Ghetto Tech: Make it yourself THC Gummies

Microdose these juicy little bears

Ghetto Tech: Do-it-yourself Coconut Chalice

It a go bun, it a go dung

Ghetto Tech: Make it yourself Cannabutter

Culinary cannabis basic building block